Home

Feedback

Technology
Shop
Testimonials

FAQ

This page describes how to use the NanoVit treatment in typical applications, including Bikes, Cars and Trucks. You can purchase NanoVit in the online shop or by calling us. If you need more information to help you decide what NanoVit service or product is best for you take a look at the products page or get in touch. 

Each mini-guide below explains what you need to know to apply the NanoVit treatment to your vehicle. Of course, if you still have questions or need some further guidance please call us or send us an email at info@nanovit.co.uk

General Guidelines for NanoVit Users

NanoVit is a powder. The consumer solutions contain the NanoVit powder which may settle during storage and transit. As a precaution we also recommend that you shake the bottles vigorously to remix the powder before use. Turning the bottle upside down for a period of time before use can assist in this process.

NanoVit solutions will work best if your engine lubricant is warm

Apply the solutions after a journey or a period of idling for best results

 

Using NanoVit in your Car or Motorbike

What is needed?

Cars
For engines with a capacity of 1L to 2.2L - 1 bottle per stage (1x Part No 0106) - link to shop
For engines with a capacity of 2.2L to 3.5L - 1.5 bottles per stage - link to shop
For engines with a capacity of 3.5L to 6L - 2 bottles per stage (2x Part No 0106) - link to shop

Motorbikes
Wet Clutch Bikes - (1x Part No 0106) -
link to shop
Manual Gearbox (non-wet clutch) - 1x Part No 0106 plus 1x part 0112 - link to shop
Auto Gearbox (non-wet clutch) - 1x Part No 0106 plus 1x part 0113  - link to shop

  Part No 0106 - NanoVit Engine Renovator

It is not necessary to change the oil unless it is in very poor condition. However, a simple way to approach the treatment is to perform the first application just before a service is due. This will ensure that both the oil filter and oil itself is changed between the first and second application, removing any dirt deposited from the cleaning process.

Shake the bottle vigorously for 20 secs before usage!
 
1 Pour 1 bottle into the oil top-up cap of a pre-warmed engine 

      Important: Perform this application after idling 10 mins OR after driving);
     - Idle the engine for 5-10 minutes;
     - Drive 100 km (approx. 60 miles);
     - Change the oil filter (not compulsory but highly recomended particularly if nearing a required oil change, as the sediments from the systematic cleaning of the engine will be deposited in the filter)
 
2 - Pour the second bottle into the oil top-up cap of the pre-warmed engine
    - Change the Oil filter (this will have been done if you applied the first bottle before a regular service)
    - Shake the second bottle vigorously for 20 secs
    - Idle the engine for 3 mins

Ready!
 
The NanoVit coat will complete formation over the next 75 to 100 km, after which the effects will be stabilized and the permenant protection layered permenantly bonded to the engine surfaces.

Other products for Cars include Gearbox and Transmission treatments - all available from the Online Shop under the Cars category

 

Using NanoVit in Trucks and Buses

What is needed?
Auto Gearbox, Large Unit (upto 40L oil capacity)  Service Set (Large) Part No 122-1 - Link to shop
Auto Gearbox, Small Unit (upto 20L oil capacity) : Individual Parts : 1x 0107, 1x 0110, 1x 0117 - Link to shop

Manual Gearbox, Large Unit (upto 40L oil capacity) : Service Set (Large) Part No 122 - Link to shop
Manual Gearbox, Small Unit (upto 20L oil capacity) : Individual Parts : 1x 0107, 2x 0110 - Link to shop

     

 

 
Engine Treatment
 
Stir and shake the bottle vigorously for 20 secs before usage!

1 Pour 1 bottle into the pre-warmed engine;
     - Idle the engine for 10 minutes;
     - Drive 250 km;
     - Change the oil filter (not compulsory but highly recomended particularly if nearing a required oil change, as the sediments from the systematic cleaning of the engine will be deposited in the filter)

2 - Pour the second bottle into the pre-warmed engine

Ready!

The NanoVit coat will complete formation over the next 170-250 km, after which the effects will be stabilized and the permenant protection layered permenantly bonded to the engine surfaces.

Gearbox treatment



Stir and shake the bottle vigorously for 20 secs before usage!

Pour the bottle into the gearbox having pre-warmed the oil through normal driving.
 
Ready !

 

Differential Treatment



Stir and shake the bottle vigorously for 20 secs before usage!

Pour the bottle into the differential having pre-warmed the oil through normal driving.

Ready !


Application